2011 Jeep Wrangler Trailer Hitch Parts

Choose your Submodel for your 2011 Jeep Wrangler

70th Anniversary Rubicon Sahara Sport Unlimited 70th Anniversary Unlimited Rubicon Unlimited Sahara Unlimited Sport

Showing 1 - 10 of 12 products

Sort:

Show:

Image

SKU

Product

Rating

Price

2011 Jeep Wrangler Trailer Hitch - Rear 6 Cyl 3.8L CURT

Class 3 Trailer Hitch; 2in. Receiver; Select Jeep Wrangler JK
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 4000lbs. Weight Distributing; 400lbs. Weight Distributing Tongue Weight No Drilling Required~Visibility: Concealed~Install Time 20 Minutes
CURT 13432 Class 3 Trailer Hitch; 2-Inch Receiver; Fits Select Jeep Wrangler JK
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- Visibility: Concealed
- Weight Carrying Capacity: 3500
- WARNING CA Proposition 65: No
- WD Tongue Weight: 400
- Drilling Required: No
- Install Time: 20 Minutes
- WC Tongue Weight: 350
- Weight Distribution: 4000
- Receiver Tube Size: 2.000 In.
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable High-Gloss Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
Whatever your task at hand -- whether its launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close -- CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Jeep Wrangler JK (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2 in. receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid Bonderite and black powder coat for superior resistance to rust, chipping and UV damage.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Jeep Wrangler	V	3778	Rear	6 Cyl 3.8L	231

1 In Stock

$188.31 CAD

$225.97 CAD

Brand	CURT
Part #	13432
Condition	New
Warehouse	C

2011 Jeep Wrangler Trailer Hitch Crown Automotive

Includes Hitch/Hardware/4-Pin Harness And Hitch Pin
Trailer Hitch Master Kit; Includes Hitch/Hardware/4-Pin Harness And Hitch Pin;
Trailer Hitch Master Kit
Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm; Http://www.p65warnings.ca.gov/
Features:
- Trailer Hitch Master Kit
Crown Automotive is the premiere manufacturer and distributor of quality replacement parts for Jeep(R) CJ(TM), Wrangler(TM), Cherokee(TM), Grand Cherokee(TM), Liberty(TM), and Commander(TM). With over 8,000 different parts in stock for Jeep(R) vehicles from 1942 on up, Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory-discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission and transfer case components. Crown Automotive also offers an exclusive line of component kits and accessory products. Because we know that Jeeps are driven harder than most other vehicles, we emphasize offering only quality parts. In fact, we test parts on Jeeps before distributing them to our dealers to insure that they meet our standards for quality. Crown also supports its entire line with a 12 month/12,000 mile warranty to insure our dealers and their customers of our commitment to offering quality parts.

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler

3 In Stock

$205.96 CAD

$247.15 CAD

Brand	Crown Automotive
Part #	C1Y52060290MK
Condition	New
Warehouse	B

2011 Jeep Wrangler Trailer Hitch - Front 6 Cyl 3.8L CURT

2in. Front Receiver Hitch; Select Jeep Wrangler JK
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight; 9000lbs. Straight-Line Pull No Drilling Required~Visibility: Concealed~Install Time 45 Minutes~Air Dam Modification Required
CURT 31432 2-Inch Front Receiver Hitch; Select Jeep Wrangler JK
2 in Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- WARNING CA Proposition 65: No
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides A Convenient Mount For Hitch Accessories
- Ideal For Attaching A Snow Plow Cargo Carrier/Front Hitch Acc.
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 350 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Wrangler JK (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Jeep Wrangler	V	3778	Front	6 Cyl 3.8L	231

2 In Stock

$357.57 CAD

$429.08 CAD

Brand	CURT
Part #	31432
Condition	New
Warehouse	C

2011 Jeep Wrangler Trailer Hitch - Rear DV8 Offroad

Gloss Dual Powder Coat
Bolt-On Hitch; Gloss Dual Powder Coat;
Bolt-On Hitch
Product Attributes:
- Gross Trailer Weight: N/a
Features:
- Heavy Duty
- Included Optional Flat 4 Pin Mount
- Mounts In Factory Location
- Gloss Dual Powder Coat Finish
The DV8 AHJP-02 is the perfect addition to your Jeep. Designed to take abuse, our 2 in. accessory hitch can offer the perfect spot to use for a quick recovery, or a mount for your racks used to haul all of your gear. Using the factory location, our 2 in. accessory hitch comes with all the hardware and flat 4 pin mount needed. Designed to work with all DV8 non-hitch equipped bumpers, the AHJP-02 comes ready for a quick and simple install.

Additional Fitment Information:

Vehicle	Position
2011 - Jeep Wrangler	Rear

3 In Stock

$126.08 CAD

$151.30 CAD

Brand	DV8 Offroad
Part #	DV8AHJP-02
Condition	New
Warehouse	B

2011 Jeep Wrangler Trailer Hitch - Front Draw-Tite

500 lbs. Weight Carrying [Tongue Weight/Gross Trailer Weight] Uses Existing Holes; No Drilling Required~ 900/9000 lbs. When Used With A Weight Distribution Kit~ Install Time Is 40 Minutes
Front Mount Receiver
Front Mount Receiver
Product Attributes:
- Gross Trailer Weight: 500 Lbs.
Features:
- Front Mount Receiver
2" Square Receiver Tube Opening . Offers a secure and useful attachment point. Neat Appearance, All Frame Attachments . A-Coat Base with Black Powder Coat Finish . Rated up to 9,000 lbs. Line Pull. Rated up to 500 lbs. Tongue Weight . Solid All-Welded Construction for Maximum Strength and Safety . Custom Built According to Manufacturer & Model Year . Computer-Aided Design and Fatigue Stress Testing . Designed to Withstand Road Abuse Within Specified Capacities . Backed by a Nationwide Limited Lifetime Warranty

Additional Fitment Information:

Vehicle	Position	Sub Model
2011 - Jeep Wrangler	Front	Unlimited Sahara

4 In Stock

$345.63 CAD

$414.76 CAD

Brand	Draw-Tite
Part #	D7065069
Condition	New
Warehouse	B

2011 Jeep Wrangler Trailer Hitch Curt Towing

2011 Jeep Wrangler Trailer Hitch Curt Towing

Class III
2 in. Receiver

Additional Fitment Information:

Vehicle
2011 - Jeep Wrangler

Brand	Curt Towing
Part #	CRM2350687
Condition	New
Warehouse	A

2011 Jeep Wrangler Trailer Hitch - Front 6 Cyl 3.8L CURT

2in. Front Receiver Hitch; Select Jeep Wrangler JK
3500lbs. Gross Trailer Weight; 350lbs. Tongue Weight Square Main Body~No Drilling Required~Visibility: Exposed~Install Time 20 Minutes~For Models w/Hard Rock Bumper
CURT 31433 2-Inch Front Receiver Hitch; Select Jeep Wrangler JK
2 in Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 3500 Lbs.
- WARNING CA Proposition 65: No
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Provides Convenient Attachment Point For Front Mount Accessories
- Ideal For Attaching A Cargo Carrier Or Front Hitch Accessories
- Allows For Easy Maneuvering Of A Trailer Into A Tight Spot
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Protected By A Durable Black Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Equipped w/An Open-Back Receiver For Easy Cleaning
- Backed By A Limited Lifetime Warranty
- Made In USA
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a w in., a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT w in. mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2 in. x 2 in. shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 3,500 lbs. GTW and 525 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Jeep Wrangler JK (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.

Additional Fitment Information:

Vehicle	Block	CC	Position	Engine	CID
2011 - Jeep Wrangler	V	3778	Front	6 Cyl 3.8L	231

Brand	CURT
Part #	31433
Condition	New
Warehouse	C

2011 Jeep Wrangler Trailer Hitch - Rear Rampage

Black; Fits PN[86605] Rear Bumper
Recovery Receiver Hitch; Black; Fits PN[86605] Rear Bumper;
Recovery Receiver Hitch
Product Attributes:
- Gross Trailer Weight: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Drilling Required: Yes
Features:
- Recovery Rear Bumper Optional Receiver Hitch
- No Drill Attachment to Factory Frame and Bumper
The optional Rampage 2-inch receiver bolts to JK Recovery bumper and frame using factory bolt holes with no drilling required.

Additional Fitment Information:

Vehicle	Position
2011 - Jeep Wrangler	Rear

Brand	Rampage
Part #	86611
Condition	New
Warehouse	C

2011 Jeep Wrangler Trailer Hitch - Rear Rampage

Black
Recovery Trailer Hitch; Black;
Recovery Trailer Hitch
Product Attributes:
- Gross Trailer Weight: N/a
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
Features:
- Receiver/Tow Hitch For Jeep Wranglers w/o Factory Hitch Receiver
- 2 in. Receiver With Black Powder-Coated Finish
- Abrasion- And Corrosion-Resistant
- Includes All Required Installation Hardware
The Rampage Products 2 in. tow hitch is made for the JK/JL that comes without a factory equipped hitch receiver. The 2 in. tow hitch features a black powder-coated finish. It comes with all the necessary hardware you'll need for an easy installation and no drill mounting to the frame.

Additional Fitment Information:

Vehicle	Position
2011 - Jeep Wrangler	Rear

Brand	Rampage
Part #	86628
Condition	New
Warehouse	C

2011 Jeep Wrangler Trailer Hitch - Rear Rough Country

2000 lbs. Gross Trailer Weight; 350 lbs. Tongue Weight
Class III 2 in. Receiver Hitch; Rear; 2000 lbs. Gross Trailer Weight; 350 lbs. Tongue Weight;
Class III 2 in. Receiver Hitch
Product Attributes:
- Gross Trailer Weight: 2000 Lbs.
- WARNING CA Proposition 65: No
Features:
- 10-Stage Variable Valving
- High Pressure Nitrogen Charged
Rough Countrys new Class III hitch installs into the factory location eliminating the factory tow hook.